| Customization: | Available |
|---|---|
| Type: | Centerless Grinding Machine |
| Processing Object: | Outer Diameter |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| MG1060 The machine tool can be used for all kinds of cylinder parts,ring partsand long rod material.Through grinding,lessthan1:20 of thecone coneand a variety of rotary forming Cutting and grinding of parts.Suitable formass production and mass production. | |||
| The grinding wheel spindle bearings four tilt ballbearing vcsupport,high precision. | |||
| The guide wheel spindle structure with double bearing support,with four pieces of tiltable ball head support bearing,bearing capacity,high precision. | |||
| The feed mechanism a dopts the servomotor to drive highprecision planetary gear reducer pass.Through coupling todrive the ball screw to realizethe feed,And aslot machine is installed. | |||
| The transmissiongap is used to eliminate the transmission clearance,thereby ensuring that the parts can obtain highprecision. | |||
| The wheel gear adopts AC frequency conversion speed,can realize step less speed regulation.The sand wheel dresser,reciprocating hydraulic transmission,stepless speed regulation. | |||
| The operation is play using the man-machine dialogue,automatic cutting and grinding process,into the quantity,speed and time can be adjusted. | |||
| Gringding dia(mm) | Thru-feed | 5~60mm | |
| Plunge feed | 5~60mm | ||
| Gri.wheel spec(mm) | PSA500*200*305mm | ||
| Reg.wheel spec(mm) | PSA350*200*127mm | ||
| Gri.wheel speed(r/min) | 1318r/min | ||
| Reg.wheel speed(r/min) | 10~200r/min | ||
| Reg.wheel swivel angle(°) | In vertical plane | -1° ~ 5° | |
| In horizontal plane | 0° ~5° | ||
| Minimum grinding feed | 0.001mm | ||
| Feed of each meter of trimmer dial | 0.01mm | ||
| Height from centerline of gri.wheel®.wheel to workrest(mm) | 250mm | ||
| Total power of machine(kw) | 15kw | ||
| Grinding wheel motor | 11kw | ||
| Guide wheel motor | 1.5kw | ||
| Cooling pump motor | 0.9kw | ||
| Hydraulic pump motor | 1.1kw | ||
| Machine tool connecting power | Three phase 380V 50HZ | ||
| Overall dimensions(mm) | 1950*1680*1480 | ||
| Machine weight (kg) | about 3200kg | ||
| Machining accuracy | Roundness(μm) | 0.001mm | |
| Cylindricity(μm) | 0.002mm | ||
| Roughness | Ra0.2 | ||
){kind=link}